Wacom DTU-710 사용자 설명서

From the WACOM TABLET Control Panel, select the CALIBRATION tab.

  If you are working with multiple monitors, select the Monitor that corresponds to the 

tablet's LCD display. (Only monitors that are set to one of the resolutions supported 

by the DTU-710 will appear in the list.)

Click on the CALIBTRATE... button to display the monitor calibration screen.

Cross-hairs

Adjustment pattern 

for phase and pitch.  

See 

Adjusting Pitch 

and Phase (VGA 

Only) on page 26 for 

details.

You will need to calibrate the pen display tablet in order to align the screen cursor 
position with the position of the pen on the display screen. This is required to 
adjust for parallax caused by the display screen cover glass. Set the DTU-710 in 
its working position, then follow the procedure below.