Wacom DTU-710 사용자 설명서

As the tablet portion of DTU-710 emits electromagnetic waves at a certain frequency, if another tablet 

is closely placed to DTU-710, the screen cursor may jitters or jumps around. To solve this problem, 

place the tablet away from DTU-710.

As properties of LCD panel display, you may notice the followings. They do not mean the LCD is 

defective.

 - When exerting hard downward pressure on the display, a moir pattern may temporarily appear.

 - A very small number of pixels may appear in incorrect color. 

 - If an image area has fine striping (such as screen stripes), it may flicker or display a moir pattern or  

pooling image.

 - When a still image is displayed for a long period of time, an afterimage may remain for a short period 

of time.

Turns the power to the unit on or off. 

POWER

STATUS

ENTER

E

N

-

MENU

*2 

Lights blue when power has been supplied 

to both the DTU-710 and the computer and 

a video signal is present.

Glows orange when no video signal is 

received by the DTU-710. (e.g., Your 

computer is turned off, starting up, or has 

entered a power management mode in 

which video signals are not sent.)

Lights blue when the pen is in the active 

area of the pen display tablet and the pen 

tip, side switch, or eraser are pressed. Note 

that the USB cable must be plugged into an 

active USB port before the LED will light.

Press this button when you select or exit an 

item in the OSD*1 menu. 

☞ P 22

In the OSD*1 menu, Use these buttons to select an option that can then be 

activated.  After activating a selected option, press the + button to increase a 

selected item value, and press the - button to decrease it.

Opens and closes the 

OSD*1 menu.

The LCD monitor*2 and tablet sensor function*3 as an 

integrated input and output device.

The LCD resolution is 1280 x 1024 pixels at 16,194,277 

colors. The tablet sensor reports coordinates, pressure, 

switch, and eraser information.

*3 

*1 On Screen Display. ☞ P. 22