Wacom DTU-710 사용자 설명서

Hold the pen as you normally do, and use the pen tip to click on the cross-hairs in the 

upper-left corner. 

Then click on the cross-hairs that are displayed in the lower-right corner. (For 

Windows systems, you will need to click APPLY or OK for the changes to take effect.)

Test the alignment and click OK to accept the calibration. Click TRY AGAIN to 

recalibrate.

  Be sure to read the directions in the calibration screen for detailed instructions and 

additional options. The calibration setting applies to all applications.

To calibrate two pen display tablets, first touch the pen to tablet #1 and open the control 
panel without touching the pen to tablet #2. In the control panel, select the correct 
monitor and calibrate tablet #1. Close the control panel, touch the pen to tablet #2, and 
again open the control panel without touching the pen to tablet #1. Select the correct 
monitor and calibrate tablet #2.

  If more than one pen display tablet is installed on your system, the 

control panel will change the settings for the tablet that was last used 

before opening the control panel.