Wacom DTU-710 사용자 설명서

  When attaching DTU-710 onto 

an alternate mounting platform, 

be sure to follow all instructions 

in the documentation supplied 

by the platform manufacturer.   

If improperly installed, the unit 

could fall and be damaged.

unscrew

Turn off your computer and  

power off DTU-710.  Then  

disconnect all cables from 

DTU-710.

Protect the display screen 

surface by spreading a soft 

cloth onto a flat table and 

placing DTU-710 face down 

on the cloth.

 Remove the four screws 

and lift the adjustable stand 

assembly away from the body 

of DTU-710.

Using the appropriate screws 

for your mounting platform, 

firmly attach DTU-710 to the 

alternate mounting platform.

Rettach the cabling.

If you will be using DTU-710 in an installation that requires the use of an alternate 
mounting platform, you can remove the adjustable stand from DTU-710 and mount the 
pen display onto a VESA conforming mount arm or stand.   
A VESA mounting platform will require mount screws that are 4 mm wide with a 0.7 
mm pitch (M4 Regular), and a maximum screw clearance depth of 15 mm.  Exceeding 
the screw clearance depth of 15 mm will damage DTU-710 internal components.
To remove the adjustable stand and attach DTU-710 to a different mounting platform: