Wacom DTU-710 사용자 설명서

To remove, slide it to the right.

The stand can be used to 

adjust the tilt angle of the unit 

from low  (16°from horizontal) 

to high (72° from horizontal). 

Pull this lever to adjust the 

stand.  Release the lever to 

lock the stand in place.

Be sure to adjust the tilt angle of the stand to the low tilt position 
before packaging DTU-710.  If you do not close the stand, the 
notched mechanism may be damaged during transportation and 
storage.  Do not lift the unit by the stand; this may damage the 
stand mechanism.  When lifting or moving the unit, always do so 
by grasping the main body casing. 

Be careful to avoid 
catching your finger in 
the gap of the movable 
portion of the stand.