Wacom DTU-710 사용자 설명서

● You have to press hard with the pen 

when clicking or drawing.

■

Open the tablet control panel and go to the PEN tab. Move 

the TIP FEEL slider toward SOFT.

● The side switch does not work.

■

Be sure you are using the pen (model UP-911E) that 

originally came with your pen display tablet. Other pens may 
not function properly on the DTU-710 pen display tablet.

■

 Be sure you press the side switch when the pen tip is in 

proximity – do this without pressing down on the pen tip.

■

 From the tablet control panel, verify that the side switch is set 

to the proper function you are expecting to occur.

■

 Make sure the status LED lights blue when you press the 

side switch. Verify also that the USB cable is plugged in; The 
LED will not light if the USB cable is not plugged into an 
active port. If the LED does not light, you may have defective 
hardware .

● The pen tip and screen cursor do 

not properly line up.

■

Open the tablet control panel and select the CALIBRATE tab. 

Continue with Calibrating the DTU-710 on page 14.

● The screen cursor moves but it does 

not jump to the pen tip location.
When the pen is placed on the 
display screen, and it does not 
follow the pen tip when the pen is 
moved across the display.

■

Make sure the pen tablet driver has loaded properly by 

opening the tablet control panel. If the driver did not load, 
you will see an error message. If an error message appears, 
reboot your computer. If the problem persists, refer to the 
appropriate Installation instructions for your platform and 
reinstall the pen tablet software.

■

 If you have customized the side switch (when equipped) 

on your pen to toggle between pen mode and mouse mode, 
make sure that your pen display tablet is operating in pen 
mode. See Button Functions, beginning on page 12, for more 
information.

● The line you are drawing does not 

line up with the location of the 
screen cursor in paint applications.

■

To function properly, some applications require that the pen 

is set to pen mode. Make sure the pen has not been toggled to 
mouse mode.

■

If the pen is set to pen mode and the problem still exists, 

then you may have a corrupted preferences file. Follow the 
instructions in the next tip to create a new preferences file.

● The screen cursor jumps back 

when using your regular mouse or 
trackball.

■

When the pen is not in use, place it on the pen rest, in the 

pen storage compartment, or at some location near the pen 
display tablet, but not on the display. Leaving your pen 
on the pen display tablet may interfere with screen cursor 
positioning when using other input devices.