Tunturi C20 사용자 설명서

The device is easy to move by pushing along on the 

integrated transport wheels. Tilt the device from 

the front and push along the floor on the wheels at 

the front support. We recommend that you use a 

protective base when transporting the equipment. 

To prevent the equipment malfunctioning, store in 

a dry place with as little temperature variation as 

possible and protected from dust.

The equipment requires very little maintenance. 

Check, however, from time-to-time that all screws 

and nuts are tight.

• After exercising, clean the equipment with a soft, 

absorbent cloth. Do not use solvents. 

• Never remove the equipment’s protective casing.

NOTE! Despite continuous quality control, defects 

and malfunctions caused by individual components 

may occur in the equipment. In most cases it’s 

unnecessary to take the whole device in for repair, 

as it’s usually sufficient to replace the defective 

part. Always give the model, serial number of 

your equipment and in case of malfunctions also 

conditions of use, nature of malfunction and any 

error code.

When you encounter unusual behavior from 

the device, contact your local Tunturi dealer for 

service. If you require spare parts, always give the 

model, serial number of your equipment and the 

spare part number for the part you need. The spare 

part list is at the back of this manual. Use only 

spare parts mentioned in the spare part list.

Length  ....................................................154 cm

Width  ......................................................64 cm

Height  ....................................................153 cm

Weight  ......................................................58 kg

The C20 meets the requirements of the EU’s 

EMC Directives on electromagnetic compatibility 

(89/336/EEC). This product therefore carries the 

CE label.

The C20 meets EN precision and safety standards 

(EN-957).

Due to our continuous policy of product 

development, Tunturi reserves the right to change 

specifications without notice.

NOTE! The instructions must be followed 

carefully in the assembly, use and maintenance 

of your equipment. The warranty does not 

cover damage due to negligence of the assembly, 

adjustment and maintenance instructions described 

herein. Changes or modifications not expressly 

approved by Tunturi Oy Ltd will void the user’s 

authority to operate the equipment!