Teledyne MODEL T703 Manual Do Utilizador
Operating the T703 Calibrator
Teledyne API T703 Calibrator Operation Manual
86
6.9.1.5. Adding a Recorder Offset to the TEST Channel
Some analog signal recorders require that the zero signal be significantly different from the baseline of the
recorder in order to record slightly negative readings from noise around the zero point. This can be achieved in
the T703 by defining a zero offset, a small voltage (e.g., 10% of span).
recorder in order to record slightly negative readings from noise around the zero point. This can be achieved in
the T703 by defining a zero offset, a small voltage (e.g., 10% of span).
To add a zero offset to a specific analog output channel, press:
07223B DCN6378