Sony 4-114-858-12(1) Manual Do Utilizador

Insert the recorded cassette.
Slide the POWER switch to VCR.

Set [DOWN CONVERT]/[DV WIDE 
CONV] according to the playback 
device (TV, etc.) (p. 85).

When dubbing to the VCR, insert a 
cassette for recording.
When dubbing to the DVD recorder, 
insert a DVD for recording.

If your recording device has an input 
selector, set it to the appropriate input 
(such as video input1 and video input2).

See page 93 for connection details.

Refer to the operating instructions 
supplied with your recording device for 
details.

b

• The following cannot be output via the   HDV/

DV interface (i.LINK):

– Indicators
– Titles that are recorded on other camcorders

• Pictures recorded in the HDV format are not 

output from the   HDV/DV interface (i.LINK) 
jack during playback pause or in any playback 
mode other than normal playback.

• Note the following when connecting with an 

i.LINK cable:

– The recorded picture becomes rough when a 

picture is paused on your camcorder while 
recording to a VCR/DVD device.

– Data codes (date/time/camera settings data) 

may not be displayed or recorded depending 
on the device or application.

– You cannot record the picture and sound 

separately.

• When dubbing to a DVD recorder from your 

camcorder through an i.LINK cable, you may 
not operate your camcorder on your DVD 
recorder even if its instruction manual says you 
can. If you can set the input mode to HDV or 
DV on your DVD recorder and can input/output 
pictures, follow the steps in “Using an i.LINK 
cable (optional).”

z

• To record the date/time and camera settings data 

when connected by the A/V connecting cable, 
display them on the screen.

• When you use an i.LINK cable, the video and 

sound signals are transmitted digitally, 
producing high quality pictures.

• When an i.LINK cable is connected, the format 

of the output signal (

 

 or 

 

) will be indicated on the LCD screen of 

your camcorder.