Hughes AN4-074-DF Manual Do Utilizador

 

This section explains how to connect the transmit and receive 
cables to the radio assembly.

Connect the transmit cable to the transmitter as follows:

1. From inside the building, disconnect the IDU power supply.
2. Go outside and connect the transmit cable (marked with blue 

electrical tape) to the transmitter connector marked IFL, as 
shown in Figure 31.
Use a weatherproof connector. 

3. Tighten the connection with a 7/16-in. wrench.
4. Secure drip loops and other points on the cable with cable 

ties.

5. Back inside the building, reconnect the IDU power supply.

Figure 31:  Connecting the transmit cable

Transmitter cable 
connector