Hughes AN4-074-DF Manual Do Utilizador
Chapter 4 • Cabling and connections
34
1035567-0001 Revision A
Receive cable
Connect the receive cable to the LNB as follows:
1. Connect the receive cable (marked with red tape) to the LNB
connector as illustrated in Figure 32.
2. Tighten the cable connector with a 7/16-in. wrench.
3. Apply dielectric silicone grease to the connection.
4. Secure the cable with cable ties.
3. Apply dielectric silicone grease to the connection.
4. Secure the cable with cable ties.
Figure 32: Connecting the receive cable to the LNB
Receive F connector, female