ONKYO SKM-540S Manual Do Utilizador
![ONKYO](https://files.manualsbrain.com/attachments/8aea18be949e459a0f55b8379882c4c18cf8698b/common/fit/150/50/cdcf544ed9e39671a87280176f4bdeefe94b330d63641d63ea2dc47d350c/brand_logo.png)
54
Advanced Setup
—Continued
Speaker Configuration
This section explains how to specify which speakers are
connected and their sizes.
For speakers with a cone diameter
larger than 6-1/2 inches (16 cm),
specify
connected and their sizes.
For speakers with a cone diameter
larger than 6-1/2 inches (16 cm),
specify
Large
(full band)
.
For those
with a smaller diameter, specify
Small
(default crossover 100 Hz)
.
The crossover frequency can be
changed on page 55.
changed on page 55.
1
Press the [RECEIVER] button fol-
lowed by the [SETUP] button.
lowed by the [SETUP] button.
2
Use the Up and Down [
]/[
]
buttons to select “1. SP Config,”
and then press the [ENTER] but-
ton.
and then press the [ENTER] but-
ton.
3
While the Subwoofer setting is
selected, use the Left and Right
[
selected, use the Left and Right
[
]/[
] buttons to select
Yes
or
No
.
Yes:
Select if a subwoofer is con-
nected.
nected.
No:
Select if no subwoofer is con-
nected.
nected.
Speaker Configuration, Crossover Frequency,
and Double Bass settings only need to be
changed if you’re not using the speakers in
this package.
These settings cannot be changed while head-
phones are connected, speaker set B is on, or
the multichannel DVD input is being used.
and Double Bass settings only need to be
changed if you’re not using the speakers in
this package.
These settings cannot be changed while head-
phones are connected, speaker set B is on, or
the multichannel DVD input is being used.
Cone diameter
RECEIVER
SETUP
4
Use the Down [
] button to
select “Front,” and then use the
Left and Right [
Left and Right [
]/[
] buttons to
select
Small
or
Large
.
Small:
Select if the front speakers are
small.
small.
Large:
Select if the front speakers are
large.
large.
Note:
• If the Subwoofer setting in step 3 is
set to No, this setting is fixed at Large
and does not appear.
and does not appear.
5
Use the Down [
] button to
select “Center,” and then use the
Left and Right [
Left and Right [
]/[
] buttons to
select
Small
,
Large
, or
None
.
Small:
Select if the center speaker is
small.
small.
Large:
Select if the center speaker is
large.
large.
None:
Select if no center speaker is
connected.
connected.
Note:
Small, the Large option cannot be
selected.
selected.
6
Use the Down [
] button to
select “Surround,” and then use
the Left and Right [
the Left and Right [
]/[
] but-
tons to select
Small
,
Large
, or
None
.
Small:
Select if the surround speak-
ers are small.
ers are small.
Large:
Select if the surround speak-
ers are large.
ers are large.
None:
Select if no surround speakers
are connected.
are connected.
Note:
Small, the Large option cannot be
selected.
selected.
HT-S790_En.book Page 54 Friday, February 17, 2006 3:28 PM