ONKYO SKM-540S Manual Do Utilizador

 

57

 

This section explains how to record the selected input 
source to a component with recording capability, and 
how to record audio and video from different sources.

You can only record to a component that’s connected to 
the TAPE OUT or VIDEO 1 OUT jacks.
See pages 22–33 for information on connecting your AV 
components. 

 

• You cannot record from a component that’s connected 

to a digital input. Only analog inputs can be recorded.

• The surround sound effects provided by the listening 

modes cannot be recorded.

• You cannot record from a component that’s connected 

to the multichannel DVD input.

• If you select another input source while recording, that 

input source will be recorded instead.

• While the Pure Audio listening mode is selected, the 

VIDEO 1 OUT V and S jacks don’t output video sig-
nals, so select another mode when recording.

You can overdub audio onto your video recordings by 
simultaneously recording audio and video from two sep-
arate sources. This is possible because only the audio 
source is switched when an audio-only input source, 
such as TAPE, TUNER, or CD, is selected, the video 
source remains the same.

In the following example, audio from the CD player con-
nected to the CD IN jacks, and video from the camcorder 
connected to the VIDEO 3 INPUT VIDEO jack are 
recorded by the VCR connected to the VIDEO 1 OUT 
jacks.

 

This selects the CD player as the audio source, but 
leaves the camcorder as the video source.

 

Video from the camcorder and audio from the CD 
player are recorded by the VCR.

 

Audio signals from the selected input 
source are output by the TAPE OUT 
and VIDEO 1 OUT jacks.
You can listen to the source while 
recording. The AV receiver’s VOL-
UME control has no effect on record-
ing.

HT-S790_En.book Page 57 Friday, February 17, 2006 3:28 PM