ONKYO DV-SP1000E Manual Do Utilizador

 

74

 

With this setting you can select the video format to be 
used for the SCART AV CONNECTOR: RGB, S-Video, 
or composite video. Before changing this setting, refer to 
your TV’s manual to see if its SCART input can accept 
video signals in these formats.

 

Composite video offers standard quality.

 

S-Video offers the next best picture quality.

 

This format offers the best picture quality. The RGB 
indicator appears on the display when this option is 
selected.

 

• If you select a format that is not supported by your TV, 

the setup menu may disappear from the screen. If this 
happens, switch off your equipment, connect the DV-
SP1000/DV-SP1000E to your TV with a composite 
video or S-Video cable, and then change this setting.

• Composite, S-Video, and RGB can also be selected 

from the front panel. With the DV-SP1000/
DV-SP1000E turned on, while holding down the Pre-
vious [

] button, press the [STANDBY/ON] button 

to select “Composite,” “S-Video,” or “RGB.”

• When RGB is selected, nothing is output by the com-

ponent video output (see page 27).

 

With this setting you can specify how the DV-SP1000/
DV-SP1000E outputs video signals when playing NTSC 
format 

 

discs

 

.

 

Use this option if your TV or projector supports PAL 
and NTSC. When you play a PAL disc, the video 
output will be PAL. When you play an NTSC disc, 
it’ll be NTSC. The DV-SP1000/DV-SP1000E does 
not convert the format.

 

Use this option if your TV doesn’t support NTSC 
playback, or the picture is distorted when watching 
NTSC discs. The DV-SP1000/DV-SP1000E will 
convert NTSC format video to a PAL-compatible 
format known as 

 

 or 

 

.

 

• This setting can be changed only when playback is 

stopped.

• PAL and AUTO can also be selected from the front 

panel. With the DV-SP1000/DV-SP1000E turned on, 
while holding down the Next [

] button, press the 

[STANDBY/ON] button to select “Auto” or “PAL.”

 

With these settings you can determine how the DV-
SP1000/DV-SP1000E outputs digital audio from its 
i.LINK sockets and DIGITAL 1 AUDIO OUTs. The 
options you choose will depend on the type of compo-
nent that you connect to the DIGITAL 1 AUDIO OUTs.

 

■

 

 

 

With this setting you can configure the DIGITAL 1 
AUDIO OUTs to output Dolby Digital audio as it is or to 
downmix it into 2-channel PCM.

 

Choose this option if you’re connecting a component 
with a built-in Dolby Digital decoder.

 

Choose this option if you’re connecting a stereo hi-fi 
amp with a digital input, an AV receiver with a built-
in Dolby Pro Logic decoder, or an external D/A 
converter.

 

■

 

With this setting you can configure the DIGITAL 1 
AUDIO OUTs to output DTS audio as it is or to down-
mix it into 2-channel PCM.

 

Choose this option if you’re connecting a component 
with a built-in DTS decoder.

 

Choose this option if you’re connecting a stereo hi-fi 
amp with a digital input or an external D/A converter.

 

• When playing the DTS audio of a DTS CD, set the CD 

Audio Setup setting to DTS (see page 80).

 

The setting is stored.
Use the same procedure to set the other 
parameters, pressing the [ENTER] but-
ton when you’ve set each one. 
Press the [SETUP] button to exit the 
onscreen setup menu.