ONKYO DV-SP1000E Manual Do Utilizador

 

76

 

This setting is used to configure the i.LINK sockets for 
use with SACD. It also affects DVD-Audio output. 

 

SACD audio is output by the analog audio outputs 
but not the i.LINK sockets. Select this option if 
you’re not using the i.LINK sockets.

 

SACD audio is output by the i.LINK sockets but not 
the analog audio outputs. Select this option if you’re 
using the i.LINK sockets.

 

• When the DV-SP1000/DV-SP1000E is plugged in and 

set to Standby, it automatically checks if it’s con-
nected to any other i.LINK components. If it is, the 
default setting for the i.LINK Output Setting becomes 
On. If not, the default becomes Off.

• When set to On, the Analog Audio Out Speaker Set-

ting and Speaker Distance settings have no effect and 
are unavailable, and multichannel SACD and 
DVD-Audio is output as it is.

• When an i.LINK component is connected and an 

SACD is loaded, if this setting is set to Off, the IEEE 
1394 indicator will flash, in which case you should set 
this setting to On.

 

With this setting you can configure the FRONT, 
SURR 1/SURR 2, CENTER, and SUBWOOFER 
AUDIO OUT sockets for use with a 2-channel amp or a 
multichannel amp.

 

• When the i.LINK Output Setting is set to On, this set-

ting is unavailable.

 

■

 

Choose this option if you’re connecting just the 
FRONT AUDIO OUT sockets to a stereo amp.

 

■

 

To access this setting, select 2 Channel, and then press 
the [ENTER] or Right [ ] button.
With this setting you can determine how the FRONT 
AUDIO OUT sockets downmix multichannel audio 
sources.

 

Choose this option if you’re connecting the FRONT 
AUDIO OUT sockets to a stereo amp or TV. Multi-
channel audio is downmixed into stereo.

 

Choose this option if you’re connecting the FRONT 
AUDIO OUT sockets to an AV receiver, TV, or other 
component with a built-in Dolby Pro Logic decoder. 

Multichannel audio is downmixed into an Lt/Rt mix, 
which is a 2-channel mix containing front left, front 
right, center, and surround channel information.

 

■

 

Choose this option if you’re connecting the FRONT, 
SURR 1/SURR 2, CENTER, and SUBWOOFER 
AUDIO OUTPUTs to a multichannel amp. When 
Multi Channel is selected, you can also set the fol-
lowing settings:

• Dolby Pro Logic Setting

• Speaker Setting

• Speaker Distance

• Test Tone

 

■

 

This setting determines how the DV-SP1000/
DV-SP1000E’s built-in Dolby Pro Logic decoder works 
with 2-channel material.

 

The Dolby Pro Logic decoder automatically detects 
and decodes only Dolby Surround material.

 

The Dolby Pro Logic decoder decodes Dolby Sur-
round material and processes the following audio 
formats: 2-channel Dolby Digital on DVD-Video 
discs, 48 kHz (16-, 20-, and 24-bit) PCM audio on 
DVD-Video discs, and 2-channel audio on CDs.

 

The Dolby Pro Logic decoder is off.

 

• In the Analog Audio Out, Speaker Setting, if Center 

Speaker or Surround Speaker is set to Off (page 44, 
78), the Dolby Pro Logic decoder will not work even 
if you select Auto or On.

 

■

 

With these settings you can enable or disable the Speaker 
Setting and Speaker Distance settings.

 

The Speaker Setting and Speaker Distance settings 
are enabled. These settings are explained in the fol-
lowing sections.

 

The Speaker Setting and Speaker Distance settings 
are disabled. Select this option if you connect the 
multichannel analog audio output to a multichannel 
analog audio input on an AV receiver that has its own 
speaker and distance settings.
Selecting Off is essentially the same as setting the 
Speaker Setting Front, Center, and Surround settings 
to Large, the Subwoofer setting to On, and the 
Speaker Distance settings to zero.

 

■

 

The test tone is used to adjust the level of each speaker 
(see page 79).