ONKYO DV-SP1000E Manual Do Utilizador

 

75

 

■

 

With this setting you can configure the DIGITAL 1 
AUDIO OUTs to output MPEG audio as it is or to down-
mix it into 2-channel PCM.

 

Choose this option if you’re connecting a component 
with a built-in MPEG decoder.

 

Choose this option if you’re connecting a stereo hi-fi 
amp with a digital input or an external D/A con-
verter.

 

■

 

With this setting you can turn the DIGITAL 1 AUDIO 
OUTs on or off. Depending on how you connect the DV-
SP1000/DV-SP1000E to your other components, this 
can be useful in certain situations.

 

DIGITAL 1 AUDIO OUTs are on.

 

DIGITAL 1 AUDIO OUTs are off.

 

• This setting has no effect on the analog audio outputs.

 

With these settings you can determine how the DV-
SP1000/DV-SP1000E outputs digital audio from its 
HDMI OUT and DIGITAL 2 AUDIO OUTs. The 
options you choose will depend on the type of compo-
nent that you connect to the DIGITAL 2 AUDIO OUTs.

 

■

 

 

 

With this setting you can configure the DIGITAL 2 
AUDIO OUTs to output Dolby Digital audio as it is or to 
downmix it into 2-channel PCM.

 

Choose this option if you’re connecting a component 
with a built-in Dolby Digital decoder.

 

Choose this option if you’re connecting a stereo hi-fi 
amp with a digital input, an AV receiver with a built-
in Dolby Pro Logic decoder, or an external D/A 
converter.

 

■

 

With this setting you can configure the DIGITAL 2 
AUDIO OUTs to output DTS audio as it is or to down-
mix it into 2-channel PCM.

 

Choose this option if you’re connecting a component 
with a built-in DTS decoder.

 

Choose this option if you’re connecting a stereo hi-fi 
amp with a digital input or an external D/A converter.

 

• When playing the DTS audio of a DTS CD, set the CD 

Audio Setup setting to DTS (see page 80).

 

■

 

With this setting you can configure the DIGITAL 2 
AUDIO OUTs to output MPEG audio as it is or to down-
mix it into 2-channel PCM.

 

Choose this option if you’re connecting a component 
with a built-in MPEG decoder.

 

Choose this option if you’re connecting a stereo hi-fi 
amp with a digital input or an external D/A con-
verter.

 

■

 

With this setting you can turn the DIGITAL 2 AUDIO 
OUTs on or off. Depending on how you connect the DV-
SP1000/DV-SP1000E to your other components, this 
can be useful in certain situations.

 

DIGITAL 2 AUDIO OUTs are on.

 

DIGITAL 2 AUDIO OUTs are off.

 

• This setting has no effect on the analog audio outputs.

 

With this setting you can configure the DV-SP1000/
DV-SP1000E to output digital audio with a high sam-
pling rate (e.g., 96 kHz) as it is or to downsample it to 
48 kHz. This setting applies to the DIGITAL 1 and DIG-
ITAL 2 AUDIO OUTs.

 

Choose this option if the component connected to the 
DIGITAL 1 or 2 AUDIO OUTs doesn’t support high 
sampling rates.

 

Choose this option if the connected component does 
support high sampling rates.

 

• Some copy-protected DVD-Video discs may use 

96 kHz digital audio only for A/D conversion to the 
analog audio outputs.

• With some discs, even if you select Down Sample Off, 

digital audio will be downsampled to 48 kHz regard-
less, and in some cases, digital audio may not be out-
put by the DV-SP1000/DV-SP1000E’s digital audio 
outputs.