Roland Fantom-X8 Manual Do Utilizador
83
Creating a Rhythm Set
With the Fantom-X, you have total control over a wide variety of
settings. Each item that can be set is known as a
settings. Each item that can be set is known as a
parameter
. When
you change the values of parameters, you are doing what is referred
to as
to as
Editing
. This chapter explains the procedures used in creating
rhythm sets, and the functions of the rhythm set parameters.
Start with an existing rhythm set and edit it to create a new rhythm
set. Rhythm sets are created from a collection of multiple rhythm
tones (percussion instruments). You can change the assignments of
the rhythm tones for each key with rhythm set edit.
set. Rhythm sets are created from a collection of multiple rhythm
tones (percussion instruments). You can change the assignments of
the rhythm tones for each key with rhythm set edit.
The rhythm tone assigned to each key consists of up to four waves.
Rhythm tones and waves are related in the same way that patches
and tones are related.
Rhythm tones and waves are related in the same way that patches
and tones are related.
1.
Press [PATCH/RHYTHM] to access the Patch Play screen,
and select the part (keyboard part or pad part) and rhythm
set whose settings you want to edit (p. 52).
and select the part (keyboard part or pad part) and rhythm
set whose settings you want to edit (p. 52).
You cannot edit the rhythm sets in the GM group.
If you want to create a rhythm set from scratch (rather than
starting from an existing rhythm set), execute the
starting from an existing rhythm set), execute the
Initialize
2.
Press [PATCH EDIT].
The Rhythm Edit screen appears.
fig.07-001_50
3.
The parameters are organized into several editing groups.
Press [F1 (
Press [F1 (
⇑
)] or [F2 (
⇓
)] to select the tab for the editing
group that contains the parameter you wish to edit.
For details on how the parameters are grouped, refer to
4.
Use
or
to move the cursor to the parameter you
wish to modify.
5.
Press [F8 (Wave Sw/Sel)] to select the wave that you want
to edit.
to edit.
The Wave Sw/Select window will appears.
fig.05-011_50
Press any one of the [F5 (Wave Select1)]–[F8 (Wave Select4)]
buttons to select the wave that you want to edit.
buttons to select the wave that you want to edit.
•
Simultaneously editing the same parameter of multiple
waves
To select the tones you want to edit at the same time,
simultaneously press two or more of the [F5 (Wave Select1)]-[F8
(Wave Select4)] buttons, making them light red.
simultaneously press two or more of the [F5 (Wave Select1)]-[F8
(Wave Select4)] buttons, making them light red.
•
To switch a wave on/off
Press a [F1 (Wave Sw1)]–[F4 (Wave Sw4)] button to switch the
corresponding wave on/off.
corresponding wave on/off.
*
You can also select the tone by pressing
or
.
6.
When you have made your selection, press [EXIT].
7.
Turn the VALUE dial, or Press [INC]/[DEC] to set a value.
•
To change the part that you want to edit
Press [F7 (Part Select)].
8.
Repeat steps 5–7 to set each parameter you want to edit.
9.
If you wish to save the changes you’ve made, press
[WRITE] to perform the Save operation (p. 86). If you do not
wish to save changes, press [EXIT] to return to the Patch
Play screen.
[WRITE] to perform the Save operation (p. 86). If you do not
wish to save changes, press [EXIT] to return to the Patch
Play screen.
If you return to the Patch Play screen without saving, an “*”
will be displayed at the left of the rhythm set number,
indicating that the rhythm set settings have been edited.
will be displayed at the left of the rhythm set number,
indicating that the rhythm set settings have been edited.
If you turn off the power or select a different sound while the
display indicates “*,” your edited rhythm set will be lost.
display indicates “*,” your edited rhythm set will be lost.
How to make Rhythm Set
settings
Fantom-X678_r_e.book 83 ページ ２００５年５月１２日 木曜日 午後４時４０分