ONKYO TX-SR804E Manual Do Utilizador

68

Adjusting the Listening Modes—Continued

■ Dolby EX
This setting determines how Dolby Digital EX signals 
are handled. This setting is unavailable if no surround 
back speakers are connected or the ZONE 2 SPEAKERS 
terminals are being used (page 82).

Auto: Dolby Digital EX can be selected from 

among the Dolby listening modes, and THX 
Surround EX can be selected from among the 
THX listening modes.

Manual: You can select listening modes in accordance 

■ Late Night
With the Late Night function, you can reduce the 
dynamic range of Dolby Digital material so that you can 
still hear quiet parts even when listening at low volume 
levels—ideal for watching movies late at night when you 
don’t want to disturb anyone.

Off: Late Night function off.

Low: Small reduction in dynamic range.

High: Big reduction in dynamic range.

Setting Late Night with the Remote Controller:
The remote controller can be used to set the Late Night 
function only when the input source is Dolby Digital.

Notes:
• The effect of the Late Night function depends on the 

Dolby Digital material that you are playing, and with 
some material there will be little or no effect.

• The Late Night function is set to Off when the AV 

receiver is set to Standby.

With this setting, you can set the level of the LFE (Low 
Frequency Effects) channel for Dolby Digital, DTS, 
MCH PCM (HDMI IN), and MCH Ana (multichannel 
DVD input). The level can be set to –

∞, –20 dB, –10 dB, 

or 0 dB (default).
If you find that the low-frequency effects are too loud 
when using one of these sources, set the level to –20 dB 
or –

∞ dB.

■ Input Ch
This setting determines which channel is output when 
the Mono listening mode is used with a stereo source.

Auto L+R: Both the left and right channels are output 

(default).

Left: Only the left channel is output.

Right: Only the right channel is output.

■ Output Sp
This setting determines which speakers output mono 
audio when the Mono listening mode is selected.

Front: Mono audio is output from the front left and 

right speakers.

Center: Mono audio is output from the center speaker 

(default).

■ Multiplex
This setting determines which channel of a stereo multi-
plex source is output. Use it to select audio channels or 
languages with multiplex sources, multilingual TV 
broadcasts, and so on.

Main: The main channel is output (default).

Sub: The sub channel is output.

Main/Sub: Both the main and sub channels are out-

put.

L NIGHT

RECEIVER