Manualsbrain.com
  1. Manuais
  2. Marcas
  3. ONKYO
  4. TX-SR804E
  5. Manual Do Utilizador

ONKYO TX-SR804E Manual Do Utilizador

Download
Página de 96
69
Adjusting the Listening Modes—Continued
You can specify a default listening mode for each signal 
format supported by each input selector. The AV receiver 
will then automatically select that listening mode based 
on the format of the input signal. You can select other 
listening modes while listening to a source, but the 
default listening mode specified here will be used next 
time you turn on the AV receiver.
Note:
This procedure can also be performed on the AV receiver 
by using its [SETUP] button, arrow buttons, and 
[ENTER] button.
Ana/PCM: Specifies the default listening mode for ana-
log sources and PCM digital audio sources.
Dolby D: Specifies the default listening mode for Dolby 
Digital sources.
DTS: Specifies the default listening mode for DTS 
sources.
D.F. 2ch: Specifies the default listening mode for 
2-channel (2/0) stereo sources in a digital format, such as 
Dolby Digital and DTS.
D.F. Mono: Specifies the default listening mode for 
mono sources in a digital format, such as Dolby Digital 
and DTS.
176.4/192 kHz: Specifies the default listening mode for 
high resolution 176.4 kHz and 192 kHz digital audio 
sources such as DVD-Audio.
MCH PCM: Specifies the default listening mode for 
multichannel PCM sources input via a HDMI IN, such as 
DVD-Audio.
MCH Ana: Specifies the default listening mode for the 
analog multichannel DVD input. This option is only 
available for the “1. DVD” input selector.
Default Listening Modes
1
Press the [RECEIVER] REMOTE 
MODE button, followed by the 
[SETUP] button.
The main menu appears onscreen.
2
Use the Up and Down [
]/[
] 
buttons to select “5. Listening 
Mode Preset,” and then press 
[ENTER].
The Listening Mode Preset menu 
appears.
3
Use the Up and Down [
]/[
] 
buttons to select an input selec-
tor, and then press [ENTER].
The options for that input selector 
appear.
For the TUNER input selector, the only 
signal format is “Ana/PCM.”
RECEIVER
ENTER
ENTER
5.Listening Mode Preset
------------------------
 1.DVD
 2.VIDEO1
 3.VIDEO2
 4.VIDEO3
 5.VIDEO4
 6.TAPE
 7.TUNER
 8.CD
 9.PHONO
ENTER
ENTER
5-1.ListeningMode Preset
---------VIDEO1---------
 a.Ana/PCM
     :Last Valid
 b.Dolby D
     :Last Valid
 c.DTS
     :Last Valid
4
Use the Up and Down [
]/[
] 
buttons to select a signal format, 
and then use the Left and Right 
[
]/[
] buttons to select a lis-
tening mode.
Only listening modes compatible with 
each signal format can be selected.
The signal formats are explained below.
5
When you’ve finished, press the 
[SETUP] button.
Setup closes.
ENTER
ENTER