ONKYO TX-SR8360 Manual Do Utilizador
68
Advanced Setup
You can adjust the bass and treble for the front speakers,
except when the Direct or Pure Audio (not North Amer-
ican TX-SR603) listening mode is selected.
except when the Direct or Pure Audio (not North Amer-
ican TX-SR603) listening mode is selected.
■
Bass
You can boost or cut low-frequency sounds output by the
front speakers from –10 dB to +10 dB in 2 dB steps.
front speakers from –10 dB to +10 dB in 2 dB steps.
■
Treble
You can boost or cut high-frequency sounds output by
the front speakers from –10 dB to +10 dB in 2 dB steps.
the front speakers from –10 dB to +10 dB in 2 dB steps.
Here you can set listening mode-related settings and
functions.
functions.
Note:
This procedure can also be performed on the AV receiver
by using its [SETUP] button, arrow buttons, and
[ENTER] button.
by using its [SETUP] button, arrow buttons, and
[ENTER] button.
Adjusting the Bass & Treble
1
Press the [TONE] button repeat-
edly to select either Bass or
Treble.
edly to select either Bass or
Treble.
2
Use the TONE [–]/[+] buttons to
adjust.
adjust.
1 2
TONE
+
Audio Adjust Functions
1
Press the [RECEIVER] button fol-
lowed by the [SETUP] button.
lowed by the [SETUP] button.
The main menu appears onscreen.
2
Use the Up and Down [
]/[
]
buttons to select “4. Audio
Adjust,” and then press [ENTER].
Adjust,” and then press [ENTER].
The Audio Adjust menu appears.
3
Use the Up and Down [
]/[
]
buttons to select the settings,
and use the Left and Right [
and use the Left and Right [
]/
[
] buttons to set them.
The settings are explained on page 69.
4
When you’ve finished, press the
[SETUP] button.
[SETUP] button.
The setup menu closes.
RECEIVER
ENTER
ENTER
ENTER