ONKYO TX-SR876 Manual Do Utilizador

62

Note:
This procedure can also be performed on the AV receiver 
by using its [SETUP] button, arrow buttons, and 
[ENTER] button.

For the onscreen setup menus to display properly, you 
must specify the TV system used in your area.

Note:
This procedure can also be performed on the AV receiver 
by using its [SETUP] button, arrow buttons, and 
[ENTER] button.

q]/[w] but-

e]/[r] buttons to select:

Select this if you’re not using 
Speakers B.

Select this if you’ve connected your 
front Speakers B normally.

Select this if you’ve connected your 
front Speakers B for bi-amped 
operation.

Select this if you’ve connected your 
front Speakers B for bridged opera-
tion. The BTL indicator will appear 
on the display.

Note:
“Bi-Amp” and “BTL” cannot be 
selected if “Front(Speaker A)” is set to 
“Bi-Amp” or “BTL”.

Press the [SETUP] button.
Setup closes.

Press the [RECEIVER] button, 
followed by the [SETUP] button.
The main menu appears onscreen.

If the main menu doesn’t appear, make 
sure the appropriate external input is 
selected on your TV.

q]/[w] but-

tons to select “6. Miscella-
neous”, and then press [ENTER].
The “Miscellaneous” menu appears.

q]/[w] but-

tons to select “2. OSD Setup”, 
and then press [ENTER].
The “OSD Setup” menu appears.

Note:
The “TV Format” (*) setting is not 
available on the North American mod-
els.

q]/[w] but-

e]/[r] buttons to select:

Auto: Select this to have the AV 

receiver automatically detect 
the TV system from the video 
input signals.

NTSC: Select if the TV system in 

your area is NTSC.

PAL: Select if the TV system in 

your area is PAL.

Press the [SETUP] button.
Setup closes.