ONKYO TXNR828 Manual Do Utilizador

With the supplied calibrated microphone, 
Audyssey MultEQ

®

 automatically determines the 

number of speakers connected, their size for 
purposes of bass management, optimum crossover 
frequencies to the subwoofer (if present), and 
distances from the primary listening position.
Audyssey MultEQ then removes the distortion caused 
by room acoustics by capturing room acoustical 
problems over the listening area in both the frequency 
and time domain. The result is clear, well-balanced 
sound for everyone. Audyssey MultEQ can be used 
with Audyssey Dynamic EQ

®

 and 

Audyssey Dynamic Volume

®

 (

).

Before using this function, connect and position all of 
your speakers.
Audyssey MultEQ offers two ways of measuring: the 
“Audyssey Quick Start” and “Audyssey MultEQ 
Full Calibration”.
• “Audyssey Quick Start” uses the measurement 

from one position to perform the speaker setting 
only.

• “Audyssey MultEQ Full Calibration” uses the 

measurement from six positions to correct room 
response in addition to the speaker setting.

The more positions are used in measuring, the better 
the listening environment will become. We 
recommend using a measurement from six positions 
to create the best listening environment.
The Quick Start takes 2 minutes and Full Calibration 
takes about 20 minutes.
Total measurement time varies depending on the 
number of speakers.

To create a listening environment in your home 
theater that all listeners will enjoy, Audyssey MultEQ 
takes measurements at up to six positions within the 
listening area. Position the microphone at ear height 
of a seated listener with the microphone tip pointed 
directly at the ceiling using a tripod. Do not hold the 
microphone in your hand during measurements as 
this will produce inaccurate results. 

■

Also referred to as the Main Listening Position, this 
refers to the most central position where one would 
normally sit within the listening environment. 
Audyssey MultEQ uses the measurements from this 
position to calculate speaker distance, level, and the 
optimum crossover value for the subwoofer.

■

These are the other listening positions (i.e., the 
places where the other listeners will sit). You can 
measure up to six positions.

• Make the room as quiet as possible. Background noise and 

Radio Frequency Interference (RFI) can disrupt the room 
measurements. Close windows, televisions, radios, air 
conditioners, fluorescent lights, home appliances, light 
dimmers, or other devices. Turn off the cell phone (even if 
it is not in use) or place it away from all audio electronics.

• The microphone picks up test tones played through each 

speaker as Audyssey MultEQ Room Correction and 
Speaker Setup runs.

• Audyssey MultEQ Room Correction and Speaker Setup 

cannot be performed while a pair of headphones is 
connected.

TV

a b

f

e

d
c

: Listening area

a to f: Listening position