ONKYO TX-SA705 Manual Do Utilizador

95

Advanced Setup—Continued

This preference determines whether audio received at 
the HDMI IN is output by the HDMI OUT. You may 
want to turn this preference on if your TV is connected 
to the HDMI OUT and you want to listen to the audio 
from a component that’s connected to an HDMI IN, 
through your TV’s speakers. Normally, this should be set 
to Off.

Off: HDMI audio is not output (default).

On: HDMI audio is output.

Notes:
• If On is selected and the signal can be output by the 

TV, the AV receiver/AV amplifier will output no 
sound through its speakers.

• When TV Control is enabled, this setting is set to 

Auto.

• With some TVs and input signals, no sound may be 

output even when this setting is set to On.

The AV receiver/AV amplifier can be set to automati-
cally correct any delay between the video and the audio, 
based on the data from the connected monitor.

Disable: HDMI lip sync disabled.

Enable: HDMI lip sync enabled.

Notes:
• This function works only if your HDMI-compatible 

TV supports HDMI Lip Sync.

• You can check the amount of delay being applied by 

the HDMI Lip Sync function on the A/V Sync screen 
(see page 89).

If you set the xvYCC color function to Enable while a 
source and monitor that both support the xvYCC color 
standard are connected to HDMI, the color quality will 
be improved.

Disable: xvYCC color disabled.

Enable: xvYCC color enabled.

Notes:
• If the color is unnatural when xvYCC color is set to 

Enable, change the setting to Disable.

• Refer to the connected component’s instruction man-

ual for details.

Press the [RECEIVER] button fol-
lowed by the [SETUP] button.
The main menu appears onscreen.

buttons to select “7. Hardware 
Setup,” and then press [ENTER].
The Hardware Setup menu appears.

buttons to select “5. HDMI,” and 
then press [ENTER].
The HDMI menu appears.

buttons to select them.
The HDMI settings are explained 
below.