ONKYO TX-SA705 Manual Do Utilizador

96

Advanced Setup—Continued

This function allows CEC-standard-compatible equip-
ment connected to HDMI and 

-compatible 

equipment to be operated together with the AV receiver/

AV amplifier.

Disable: HDMI Control disabled.

Enable: HDMI Control enabled.

Notes:
• Set to Disable when a connected piece of equipment is 

not compatible or it is unclear whether the equipment 
is compatible or not.

• If movement is unnatural when set to Enable, change 

the setting to Disable.

• Refer to the connected component’s instruction man-

ual for details.

■ Power Control
To link the electrical connection of CEC-standard-com-
patible equipment and 

-compatible equipment 

by means of HDMI, set to Enable. However, it may not 
be possible to power link equipment, depending on the 
settings and compatibility of the connected equipment.

Disable: Power Control disabled.

Enable: Power Control enabled.

Notes:
• The Power Control setting can be set only when the 

above Control setting is set to Enable.

• HDMI power control only works with HDMI-compat-

ible components that support it.

• When set to Enable, power consumption will increase. 

(North American models)

• The AV receiver/AV amplifier enters Ready mode 

when set to Standby. (not North American models)

• Refer to the connected component’s instruction man-

ual for details.

■ TV Control
Set to Enable when you want to control the AV receiver/

AV amplifier from an 

-compatible TV that is 

connected to HDMI.

Disable: TV Control disabled.

Enable: TV Control enabled.

Notes:
• Set to Disable when the TV is not compatible or when 

it is unclear whether the TV is compatible or not.

• The TV Control setting can be set only when the 

above Control and Power Control settings are both set 
to Enable.

• Refer to the connected component’s instruction man-

ual for details.

Notes:
• After changing the settings of the Control, Power 

Control, or TV Control, turn off the power to all 
connected pieces of equipment and then turn on 
again. Refer to the User’s Manuals for all con-
nected pieces of equipment.

• When HDMI Audio Out is set to “On” or the TV 

Control is set to “Enable” and the audio is playing 
through the TV speakers, if the volume is 
adjusted on the AV receiver/AV amplifier, the 
audio will begin to play through the speakers con-
nected to the AV receiver/AV amplifier. If you 
want to turn off the audio from the AV receiver/ 
AV amplifier, repeat the set up operation, and the 
set up for the TV, or turn down the volume to its 
lowest level.