ONKYO HT-R990 Manual Do Utilizador

En

If you connect a video component to a component video 
input, you must assign that input to an input selector. For 
example, if you connect your Blu-ray Disc/DVD player to 
COMPONENT VIDEO IN 2, you must assign “IN2” to 
the “BD/DVD” input selector. 
Here are the default assignments.

■

BD/DVD, VCR/DVR, CBL/SAT, GAME, AUX, 
TV/CD, PORT

`

IN1, IN2:

Select a corresponding component video input to 
which the video component has been connected.

`

- - - - -:

Select if you are using the HDMI output, not the 
component video output, to output composite video 
and component video sources.

`

PC IN:

Select if the personal computer is connected to PC 
IN.

• If you connect a component (such as UP-A1 Dock with docked 

iPod/iPhone) to the UNIVERSAL PORT jack, you cannot 
assign any input to the “PORT” selector.

• The  “TUNER” selector cannot be assigned and is fixed to the 

“- - - - -” option.

If you connect a component to a digital audio input, you 
must assign that input to an input selector. For example, if 
you connect your CD player to the OPTICAL IN 1, you 
must assign “OPTICAL1” to the “TV/CD” input 
selector. 
Here are the default assignments.

■

BD/DVD, VCR/DVR, CBL/SAT, GAME, AUX, 
TV/CD, PORT

`

COAXIAL1, COAXIAL2, OPTICAL1, 
OPTICAL2:

Select a corresponding digital audio input to which 
the component has been connected.

`

- - - - -:

Select if the component is connected to an analog 
audio input.

• When an HDMI IN is assigned to an input selector in “HDMI 

Input” (

page 42), the same HDMI IN will be set as a priority 

in this assignment. In this case, if you want to use the coaxial or 
optical audio input, make the selection in the “Audio Selector” 
(

page 52).

• Available sampling rates for PCM signals (stereo/mono) from a 

digital input (optical and coaxial) are 
32/44.1/48/88.2/96 kHz/16, 20, 24 bit.

• If you connect a component (such as UP-A1 Dock with docked 

iPod/iPhone) to the UNIVERSAL PORT jack, you cannot 
assign any input to the “PORT” selector.

• The  “TUNER” selector cannot be assigned and is fixed to the 

“- - - - -” option.

Here you can check the settings made by Audyssey 2EQ 
Room Correction and Speaker Setup function, or set them 
manually, which is useful if you change one of the 
connected speakers after using Audyssey 2EQ Room 
Correction and Speaker Setup function.

• These settings are not available in either of the following cases:

– a pair of headphones is connected.
– the  “Audio TV Out” setting is set to “On” (

– “HDMI Control(RIHD)” is set to “On” (

page 54) and 

you’re listening through your TV speakers.

■

`

`

Yes:

Zone 2 speakers can be used. (Powered Zone 2 
enabled).

• Before you change this setting, turn down the volume.
• When the “Powered Zone 2” setting is set to “Yes”, the 

surround back or front high speakers cannot be used.

Some of the settings in this section are set automatically 
by Audyssey 2EQ

®

 Room Correction and Speaker 

Setup (

page 30).