Lucent Technologies 8.2 Manual Do Utilizador
DEFINITY ECS Release 8.2
Administrator’s Guide
Administrator’s Guide
555-233-506
Issue 1
April 2000
Managing trunks
360
Inserting and absorbing digits
12
2. In the Digit Treatment field, type
insertion
.
This field tells the switch to add digits to the incoming digit string. These
digits are always added at the beginning of the string.
digits are always added at the beginning of the string.
3. In the Digits field, type
6
.
For insertion, this field defines the specific digits to insert. The switch will
add a “6” to the front of the digit strings delivered with incoming calls. For
example, if the central office delivers the string “4444,” DEFINITY ECS
will change it to “64444,” an extension that fits your dial plan.
add a “6” to the front of the digit strings delivered with incoming calls. For
example, if the central office delivers the string “4444,” DEFINITY ECS
will change it to “64444,” an extension that fits your dial plan.
4. In the Expected Digits field, type
4
.
This field tells the switch how many digits the central office sends.
NOTE:
The Expected digits field doesn’t appear on the screen for tie trunk
groups.
groups.
5. Press
ENTER
to save your changes.
If your service provider sends 7 digits but you only need 5, you need to absorb the
first 2 digits in the digit string. To absorb digits:
first 2 digits in the digit string. To absorb digits:
1. Type change trunk-group 5 and press
ENTER
.
The
Trunk Group
screen appears.
2. In the Digit Treatment field, type
absorption
.
This field tells the switch to remove digits from the incoming digit string.
These digits are always removed from the beginning of the string.
These digits are always removed from the beginning of the string.
3. In the Digits field, type
2
.
TRUNK GROUP
Group Number: 5
Group Type: did
CDR Reports: y
Group Name: Incoming calls
COR: 85
TN: 1
TAC: 105
Country: 1
Auth Code? n
TRUNK PARAMETERS
Trunk Type: wink-start
Incoming Rotary Timeout(sec): 5
Incoming Dial Type: tone
Trunk Termination: rc
Disconnect Timing(msec): 500
Digit Treatment: insertion
Digits: 6
Expected Digits: 4
Sig Bit Inversion: none
Extended Loop Range? n
Trunk Gain: high
Drop Treatment: silence
Disconnect Supervision - In? y