Yamaha PF-500 Manual Do Utilizador
PF-500
37
To erase recorded data from
a track, use the Channel
Clear parameter in the
“SONG SETTING” menu.
(See page 66.)
a track, use the Channel
Clear parameter in the
“SONG SETTING” menu.
(See page 66.)
5.
Play back the recorded performance.
Press the SONG [START/STOP] button to play back the
recorded performance.
Press the SONG [START/STOP] button to play back the
recorded performance.
When playback is complete, it automatically stops and the PF-500
locates the top of the song. To stop playback in the middle of a song,
press the [TOP] button. You can also pause playback by pressing the
SONG [START/STOP] button. Playback stops when you press the
button.
locates the top of the song. To stop playback in the middle of a song,
press the [TOP] button. You can also pause playback by pressing the
SONG [START/STOP] button. Playback stops when you press the
button.
Re-recording TRACK 1
This section explains how to record again in case your performance was not satisfactory.
Procedure
1.
Select a voice or voices for recording, if necessary.
Repeat Step 2 on page 36 if you wish to change the previ-
ous settings.
Repeat Step 2 on page 36 if you wish to change the previ-
ous settings.
Follow the procedure from Step 3 on page 36 to re-record.
The original performance data will be overwritten by new performance data.
NOTE
When you turn off the power to the PF-500, the recorded performance
data will be lost. If you wish to keep the recording, save the data using the
SaveToMemory parameter (page 45) in the File menu.
data will be lost. If you wish to keep the recording, save the data using the
SaveToMemory parameter (page 45) in the File menu.