Yamaha PF-500 Manual Do Utilizador

PF-500

Recording Your Performance

Re-recording TRACK 1 partially

This section explains how to record part of a song again.

Procedure

If the playback screen is not
displayed, press one of the

SONG SELECT [

] [

]

buttons once.

Pause the song at the beginning of the part you wish
to re-record.
Use the B [–]/[+] buttons while the playback screen is dis-
played to move through the measures or play back the
recording and press the SONG [START/STOP] button to
locate a point slightly prior to the beginning of the part
you wish to re-record.

Select a voice or voices for recording, if necessary.
Repeat Step 2 on page 36 if you wish to change the previ-
ous settings.

Select the recording method and enter record mode.

3-1

Press and hold down the [REC] button, and press the
C [–]/[+] buttons repeatedly to specify how the
recording should start and press the D [–]/[+] buttons
repeatedly to specify how the recording should end.

When the starting method is
set to “KeyOn,” you cannot
change a voice or tempo
(page 41) after the recording
is complete.

While you are holding down the [REC] button, the following record-
ing method select screen appears.

Starting methods:
Norm (Normal) — The existing data will be erased after re-recording
starts.
Key On — Data that exists prior to the point where you start playing a
note will not be erased.

NOTE

Playback screen

YES

NOTE

YES