Alesis DG8 Manual Do Utilizador

Página de 71
Chapter 2: Playing the DG8
52
DG8 R
EFERENCE 
M
ANUAL
I
NITIALIZING THE 
DG8
F
ACTORY 
D
EFAULTS
When the DG8 is shipped from the factory, its user parameters are set to certain
values so that the unit will perform its most basic functions right out of the box.
These are called defaults – values that are set at the factory as the most useful and/or
logical starting points for the various functions within the unit. You may have
noticed this as you explored the DG8’s functions, and this manual refers to these
default values from time to time.
If for any reason you want to return the DG8 to the state it was in when it shipped,
you can initialize (perform a complete reset) of the DG8 and return it to its default
state. This feature is particularly useful in the event a power problem causes the DG8
to behave strangely, or if certain functions do not seem to be operating as expected.
To initialize the DG8:
 
Turn it off.
 
Press and hold the 
▲ 
and 
▼ 
arrows.
 
While the arrows are being held down, turn the DG8 back on.
This simple procedure resets the following parameters:
 
MIDI volume is reset to the maximum of 
127
 for the Primary Sound,
Layer and Split
 
EQ is turned off
 
modulation is reset to 0
 
Program 
Piano1A
 is selected with no Layers or Splits
 
all Primary Sound and Bass Program sound banks are reset to the 
A
 program.
Selecting a Card Program will recall program 
000
 whether used as Primary
Layer or Split.
 
tuning is reset to A440; the 
Master Tune
 display resets to 
00
 
default Split Point is reset to key “C2”, the C one octave below Middle C
 
the AUX pedal is reset to 
Volume
 
Keyboard Scaling is reset to the mid-point value of 
50
 
Stretch Tuning is turned on
 
Sustain Catch is turned on
 
Local Control is turned on
 
Basic MIDI Channel is set to 1
 
Bass Sustain is turned off
P
OWER
-U
R
ESETTING
There are two parameters and one function which reset every time you turn the DG8
on. Modulation and volume values are reset upon power up, and the 
EQ ON/OFF
button is turned off.