Yamaha 02R96 Manual Do Utilizador
68
Chapter 7—Input Channels
02R96—Owner’s Manual
Pan Pages
Pan settings can be viewed and set on the Pan pages. If the Auto PAN/SURROUND Display
preference is on, these pages appear automatically when a control in the SELECTED
CHANNEL PAN/SURROUND section is operated. If both the [LINK] and [GRAB] button
indicators are on, these pages will also appear when the Joystick is operated. See “Auto
PAN/SURROUND Display” on page 197.
preference is on, these pages appear automatically when a control in the SELECTED
CHANNEL PAN/SURROUND section is operated. If both the [LINK] and [GRAB] button
indicators are on, these pages will also appear when the Joystick is operated. See “Auto
PAN/SURROUND Display” on page 197.
1
Use the SELECTED CHANNEL PAN/SURROUND [DISPLAY] button to select
the Input Channel Pan pages.
the Input Channel Pan pages.
The Pan parameters for the 56 Input Channels are arranged into three pages. The Input
Channel 1–24 Pan page is shown below. The layout of the other two pages is the same.
Channel 1–24 Pan page is shown below. The layout of the other two pages is the same.
2
Use the cursor buttons to select the Pan controls, and use the Parameter
wheel and INC/DEC buttons to set them.
wheel and INC/DEC buttons to set them.
Pan parameters can also be selected by using the LAYER buttons and [SEL] buttons.
The currently selected Pan control can be set to center by pressing [ENTER].
MODE: There are three Pan modes that determine how horizontally and vertically paired
Input Channels are panned: Individual, Gang, and Inverse Gang. This is a global setting that
applies to all paired Input Channels.
Input Channels are panned: Individual, Gang, and Inverse Gang. This is a global setting that
applies to all paired Input Channels.
In individual mode, paired Input Channel pan controls operate independently.
In Gang mode, paired Input Channel pan controls operate in unison.
In Inverse Gang mode, paired Input Channel pan controls operate in unison but
move in opposite directions.
move in opposite directions.
Aux Send Pan controls can be linked to Input Channel Pan controls so that operating an
Input Channel Pan control also operates the corresponding Aux Send Pan control, and vice
versa (see page 84). While linked, the Pan mode can be set on the Aux Pan page or the Input
Channel Pan page.
Input Channel Pan control also operates the corresponding Aux Send Pan control, and vice
versa (see page 84). While linked, the Pan mode can be set on the Aux Pan page or the Input
Channel Pan page.