APC AP7900 Manual Do Utilizador

To control the outlets on your Switched Rack PDU

1. Select 

, and then 

 on the navigation menu.

2. Mark the check-boxes for each individual outlet or outlet group to 

control, or select the 

 

 check-box.

3. Select a 

 from the list, and click 

. On the 

confirmation page that explains the action, choose to execute or cancel it.

Select 

from the

 menu to display a list of outlets. For each outlet, the list indicates 

whether it is a member of an outlet group.

1. Choose either or the following:

– To control one outlet and the outlet group, if any, to which it belongs, 

select the number of the outlet, and then select 

.

– To control all outlets, select 

, and 

then 

.

2. Select a control action.
3. On the confirmation screen that describes the action to be executed, 

type 

Yes 

at the prompt to perform the action.

If you apply an outlet control action to outlets or outlet groups, the 
following delays are used for the action:

• For an individual outlet (not in an outlet group), the action uses 

the delay periods and reboot duration configured for that outlet.

• For a global outlet group, the action uses the delay periods 

and reboot duration configured for the global outlet.

• For a local outlet group, the action uses the delay periods 

configured for the lowest-numbered outlet in the group.