APC AP7900 Manual Do Utilizador

The following settings are available in 

both the Web interface and control console unless otherwise indicated:

Power On Delay

Set the number of seconds that the Rack PDU waits after a 
command is issued before applying power to an outlet.

To configure an outlet to remain off at all times, check the 

 check box next to 

 in the Web interface, or 

configure a value of 

–1

 for 

 in the control console. 

Power Off Delay

Set the number of seconds that the Rack PDU waits after a 
command is issued before removing power from an outlet.

To configure an outlet to remain on at all times, check the 

 check box next to 

 in the Web interface, or 

configure a value of 

–1

 for 

 in the control console. 

Reboot Duration

Set the number of seconds an outlet remains off before restarting.

Name (Web 
interface)

Outlet Name 
(control console)

Set the name for one or more outlets. The name is displayed next 
to the outlet number on status screens.

Link (Web 
interface)

Define an HTTP or HTTPS link to a Web site or IP address.
•

 links the outlet to the home page of the 

APC Web site. 

•

 links the outlet to the Web interface of the 

Switched Rack PDU at the IP address 158.205.7.201, enabling 
you to log on to that interface (if you have the appropriate access).

If the outlet is a member of an outlet group, the only link that 

is used is the link configured for the global outlet or (for a local 
outlet group) the link configured for the lowest-numbered outlet of a 
local outlet group. You can configure a link for another outlet in an 
outlet group, but that link will be available to use only when that 
outlet is no longer a member of an outlet group.