APC AP7900 Manual Do Utilizador

– For 

, identify the URL

– For 

, identify the IP address

– For 

, identify the fully qualified domain name, formatted as 

myserver.mydomain.com

.

– For 

, identify the Mail Exchange address

• Enable or disable 

, which is disabled by default. 

Enable this feature unless you have no DNS server configured or have 
poor network performance because of heavy network traffic. With 

 enabled, when a network-related event occurs, reverse DNS 

lookup logs in the event log both the IP address and the domain name for 
the networked device associated with the event. If no domain name entry 
exists for the device, only its IP address is logged with the event. Since 
domain names generally change much less frequently than IP addresses, 
enabling reverse DNS lookup can improve the ability to identify addresses 
of networked devices that are causing events to occur.

Select this option, available only in the control console, to check the network 
connection by testing whether a defined IP address or domain name responds 
to the Ping network utility.

By default, the IP address of the default gateway is used. However, you can use 
the IP address or domain name of any device known to be running on the 
network.

Use the 

 setting to enable or disable the FTP server. The server is 

enabled by default.