Lucent Technologies R5SI Manual Do Utilizador
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-323
reset spe-standby
8
reset spe-standby
This command resets the standby SPE to a defined level.
Synopsis
reset spe-standby level
Permissions
The following default logins may execute this command: system technician,
inads, init.
inads, init.
Examples
reset spe-standby 1
reset spe-standby 2
reset spe-standby 3
reset spe-standby 4
reset spe-standby 5
reset spe-standby 2
reset spe-standby 3
reset spe-standby 4
reset spe-standby 5
Description
Resetting the standby SPE means bringing that SPE out of standby mode into
maintenance mode with the defined restart level. This command is only for a high
or critical reliability system.
maintenance mode with the defined restart level. This command is only for a high
or critical reliability system.
Defaults
None.
Parameters
level
The reset levels are entered numerically with a range of 1 - 5, the levels
are as follows:
are as follows:
Level
Recovery
1
Warm Restart
2
Cold-2