Lucent Technologies R5SI Manual Do Utilizador
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-647
test processor
8
Permissions
The following default logins may execute this command: system technician,
inads, init.
inads, init.
Examples
test processor
test processor schedule
test processor a
test processor 1a
test processor b sh
test processor a l c
test processor schedule
test processor a
test processor 1a
test processor b sh
test processor a l c
Description
The test processor command performs hardware diagnostic tests on a
technician specified processor circuit pack.
technician specified processor circuit pack.
Defaults
For SPE simplex systems, the location is optional and defaults to cabinet 1,
carrier "a". For SPE duplex systems, the cabinet default is again cabinet 1 but
there is no default for the carrier. Defaults for the remaining parameters are short
with a repeat of 1.
carrier "a". For SPE duplex systems, the cabinet default is again cabinet 1 but
there is no default for the carrier. Defaults for the remaining parameters are short
with a repeat of 1.