Manualsbrain.com
  1. Manuais
  2. Marcas
  3. Adtran
  4. 1203870G1
  5. Manual Do Utilizador

Adtran 1203870G1 Manual Do Utilizador

Download
Página de 90
NetVanta 3200/3300/3400 Series
 Unit Installation
61200860L1-34AB
Copyright © 2012 ADTRAN, Inc.
67
Figure 32.  Wall Mounting the NetVanta 3450 and NetVanta 3458
Wall Mounting the NetVanta PoE Power Supply
The NetVanta PoE Power Supply can be wall mounted. This power supply is only available with the Octal 
PoE Upgrade bundle for the NetVanta 3448 and the NetVanta 3458, which include the power supply and 
the Octal PoE module.Follow these steps to wallmount the NetVanta PoE Power Supply:
Instructions for Wall Mounting NetVanta 3450/NetVanta 3458
Step
Action
1
Remove the mounting ears. Rotate them 90
o
 so that the portion of the bracket with the mounting holes is 
flush with the bottom of the chassis, and reattach them to the chassis (see 
). 
2
Decide on a location for the unit. Keep in mind that the unit needs to be mounted at or below eye level so 
that the LEDs are viewable. 
Important! Mount the chassis with LEDs facing to the side as shown in 
 (not facing up or 
down).
3
Prepare the mounting surface by attaching a board (typically plywood, 3/4-inch to 1-inch thick) to a wall 
stud using #6 to #10 (2.5-inch or greater in length) wood screws.
Important! Mounting to a stud ensures stability. Using sheetrock anchors may not provide 
sufficient long-term stability. 
4
Have an assistant hold the unit in position as you install two #6 to #10 (1-inch or greater in length) wood 
screws through the unit’s brackets and into the mounted board. See 
.
5
Proceed to the steps given in 
.
SL
O
T 2 NE
T/DBU
SL
O
T 1 NE
T/DBU
ET
H
 0
/2
ET
H
 0
/1
SL
O
T 2 NE
T/DBU
SL
O
T 1 NE
T/DBU
ET
H
 0
/2
ET
H
 0
/1