Netgear D6100 Manual Do Utilizador

About 10 seconds after the DSL LED starts blinking, the following occurs:

The Power LED lights solid green 

, indicating that the startup procedure finished.

The Internet LED blinks amber 

. If an Internet connection is established, the 

Internet LED lights solid green 

.

Approximately one and a half minutes after you turned on the power, the WiFi LED lights 

solid blue 

.

When you turn on the modem router, the Power LED turns solid amber 

. After about one 

minute and10 seconds, the Power LED lights solid green 

, indicating that the startup 

procedure finished. If the LED does not turn green, a power-on self-test (POST) failure 
occurred or the modem router is malfunctioning. 

If the Power LED does not turn green, do the following:

Turn off the power and back on to see if the modem router recovers.

If the Power LED still does not turn green, reset the modem router to factory default 
settings. 

153.

If the error persists, a hardware problem might exist. For recovery instructions or help with a 
hardware problem, contact technical support at 

If the Power LED 

 and other LEDs remain off when you turn on the modem router, do the 

following:

Check that the Power On/Off button on the back is in the on position, that is, it is pushed 
in.

Check that the power cord is correctly connected to your modem router and that the 
power supply adapter is correctly connected to a functioning power outlet. 

Check that you are using the 12 VDC 1.5A power adapter that NETGEAR supplied for 
this product.

If the error persists, a hardware problem might exist. For recovery instructions or help with a 
hardware problem, contact technical support at 

If the WiFi LED stays off 

, check to see if both radios on the modem router are disabled 

(see 

LED lights solid blue.