EIKI LC-WUL100L Manual Do Utilizador

What is PIN code?
PIN (Personal Identification Number) code is a security 

code that allows the person who knows it to operate the 

projector. Setting a PIN code prevents unauthorized use of 

the projector. 

A PIN code consists of a four-digit number. Refer to the 

PIN code lock function in the Setting Menu on pages 61-62 

for locking operation of the projector with your PIN code.

If you forget your PIN code, the 

projector can no longer be started. 

Take a special care in setting a 

new PIN code; write down the 

number in a column on page 87 of 

this manual and keep it on hand. 

Should the PIN code be missing 

or forgotten, consult your dealer or 

service center.

Press the ON/STAND-BY button on the side control 

or the STAND-BY button on the remote control, and 

after the countdown is over, 

Power off? appears on 

the screen.
Press the ON/STAND-BY button on the side control or 

the STAND-BY button on the remote control again to 

turn off the projector. The LAMP indicator lights bright 

and the POWER indicator turns off. After the projector 

is turned off, the cooling fans operate for 90 seconds. 

You cannot turn on the projector during this cooling 

down period.

TO MAINTAIN THE LIFE OF THE LAMP, ONCE 

YOU TURN THE PROJECTOR ON, WAIT AT 

LEAST FIVE MINUTES BEFORE TURNING IT 

OFF.

When the projector has cooled down enough, the 

POWER indicator lights green and then you can turn 

on the projector. To unplug the AC power cord, wait 

until the projector is completely cooled down.

Power off? disappears after 4 seconds.



DO NOT OPERATE THE PROJECTOR 

CONTINUOUSLY WITHOUT REST. 

CONTINUOUS USE MAY RESULT IN 

SHORTENING THE LAMP LIFE. TURN OFF THE 

PROJECTOR AND LET STAND FOR ABOUT AN 

HOUR IN EVERY 24 HOURS.



Power off? afterwards on the screen.

You can disconnect the power cord from the wall outlet 

or turn off the breaker even during projection without 

pressing the ON/STAND-BY button.



Direct OFF Function

24