Citrix Systems 9.3 Manual Do Utilizador
Rack Mounting the Appliance
Most appliances can be installed in standard server racks that conform to EIA-310-D
specification. The appliances ship with a set of rails, which you must install before you
mount the appliance. The only tools that you need for installing an appliance are a
Phillips screwdriver and a flathead screwdriver.
specification. The appliances ship with a set of rails, which you must install before you
mount the appliance. The only tools that you need for installing an appliance are a
Phillips screwdriver and a flathead screwdriver.
Caution: If you are installing the appliance as the only unit in the rack, mount it at
the bottom. If the rack contains other units, make sure that the heaviest unit is at the
bottom. If the rack has stabilizing devices available, install them before mounting the
appliance.
bottom. If the rack has stabilizing devices available, install them before mounting the
appliance.
The following table lists the different hardware platforms and the rack units required
for each platform.
for each platform.
Table 3-1.
Height Requirements For Each Platform
Platform
Number of rack units
7000
One rack unit
9010 FIPS, 12000-10G
Two rack units
MPX 5500
One rack unit
MPX 5550/5650
One rack unit
MPX 7500/9500
One rack unit
MPX 8200/8400/8600/8800
One rack unit
MPX 9700/10500/12500/15500
Two rack units
MPX 15000, MPX 17000
Two rack units
MPX 11500/13500/14500/16500/18500/20500
Two rack units
MPX 17500/19500/21500
Two rack units
MPX 17550/19550/20550/21550
Two rack units
MPX 22040/22060/22080/22100/22120
Two rack units
Chapter 3
Installing the Hardware
76