Citrix Systems 9.3 Manual Do Utilizador
Figure 3-1.
Attaching inner rails
4. Repeat steps 1 through 3 to install the left inner rail on the other side of the
appliance.
To install the rack rails on the rack
1. If you have a round-hole, threaded rack, skip to step 3.
2. Install square nut retainers into the front post and back post of the rack as shown
in the following figures. Before inserting a screw, be sure to align the square nut
with the correct hole for your 1U or 2U appliance. The three holes are not evenly
spaced.
with the correct hole for your 1U or 2U appliance. The three holes are not evenly
spaced.
Figure 3-2.
Installing Retainers into the Front Rack Posts
Figure 3-3.
Installing Retainers into the Rear Rack Posts
3. Install the adjustable rail assembly into the rack as shown in the following figures.
Use a screw to lock the rear rail flange into the rack. With the screw securing the
rail in place, you can optionally remove the latching spring.
rail in place, you can optionally remove the latching spring.
Chapter 3
Installing the Hardware
78