Sanyo PDG-DHT8000L Guia Do Utilizador

Check the indicators for the projector condition.

• • • on

• • • off

• • •  blinking at the normal rate       

(approx. 1 second ON,         
1 second OFF)

• • • dim

• • •  blinking slow           

(approx. 2 seconds ON, 
2 seconds OFF)

• • • blinking fast              

(approx. 0.5 seconds ON,  
0.5 seconds OFF)

POWER

LAMP

WARNING

TEMP.

WARNING

FILTER

SHUTTER

LAMP 1/2

REP. 

The projector is off. (The main On/Off switch is OFF 

position or the AC power cord is unplugged.)

The projector is in stand-by mode. Press the ON/

STAND-BY button to turn on the projector.

The projector is operating normally.
(The Shutter is open)

The projector is operating normally.
(The Shutter is closed)

The projector is preparing for stand-by or the 

projection lamp is being cooled down. The projector 

cannot be turned on until cooling is completed and 

the POWER indicator lights green.

The projection lamp is being cooled down in the 

Power management mode.

The projector is in the Power management mode.

The projection lamp is being cooled down in the 

Shutter management mode.

The projector is in the Shutter management mode. 

Press the ON/STAND-BY button to turn on the 

projector.

The filter is scrolled using the FILTER button on 

the remote control or the Filter control function in 

the setting menu. When the filter is being scrolled, 

the Filter replacement icon and “Please wait...” 

message (Fig. 1) appear on the screen.

✽

✽

✽

✽

Fig .1   Filter replacement icon and “Please wait...”

✽

✽

✽

✽

✽

✽

✽

✽

✽

✽

✽

✽

✽

✽

✽

✽

✽

• • • Differs according to conditions.

✽