Sanyo PDG-DHT8000L Guia Do Utilizador

Appendix

The projector is detecting abnormal condition .

Indicators

Projector Condition

POWER

green

LAMP

red

WARNING

TEMP.

red

WARNING

FILTER

orange

SHUTTER

blue

LAMP 1/2

REP.

orange

If the Filter counter reached a time set in the timer

setting, a Filter replacement icon (Fig.2) appears

on the screen and the WARNING FILTER indicator

on the top panel lights up. Replace the filter as

soon as possible. If the filter is out of scroll and the

projector reaches a time set in the timer setting, Fig.

3 appears on the screen and the WARNING FILTER

indicator lights up. Replace the filter cartridge as

soon as possible.
If the filter is clogged and no scroll is left in the filter

cartridge, a Filter cartridge replacement icon (Fig.4)

appears on the screen and the WARNING FILTER

indicator lights up. Replace the filter cartridge as

soon as possible.

✔

Note:

• Fig.2, Fig.3 and Fig.4 icon will not appear when

the Display function is set to “Off” (p.49), or during

“Freeze” (p.30).

The projector detects an abnormal condition during

filter scroll.

The projector is being cooled down after detecting

an abnormal condition during filter scroll.

The projector has been cooled down enough and is

in the stand-by mode

after detecting an abnormal

condition during filter scroll.

The filter cartridge is removed while the projector is

on.

The projector is turned on without installing the filter

cartridge, and then the filter cartridge is installed

while the projector is on.
The projector detects an abnormal condition and

cannot be turned on. Unplug the AC power cord and

plug it again to turn on the projector. If the projector

is turned off again, unplug the AC power cord and

contact the dealer or the service center. Do not

leave the projector on. It may cause an electric

shock or a fire hazard.

The shutter is out of control.

The shutter is out of control. (The projector is in the

cooling mode.)

The shutter is out of control. (The projector is in the
stand-by mode.) In that case, contact the service
center immediately.

Fig . Filter replacement icon

Fig .4 Filter cartridge replacement icon

Fig .

✽