Sanyo PDG-DHT8000L Guia Do Utilizador

POWER

LAMP

WARNING

TEMP.

WARNING

FILTER

SHUTTER

LAMP 1/2

REP.

The temperature inside the projector is elevated 

close to the abnormally high level.

The temperature inside the projector is abnormally 

high. The projector cannot be turned on. When 

the projector is cooled down enough and the 

temperature returns to normal, the POWER 

indicator lights green and the projector can be 

turned on. (The WARNING TEMP. indicator keeps 

blinking.) 

The projector has been cooled down enough and 

the temperature returns to normal. When turning on 

the projector, the WARNING TEMP. indicator stops 

blinking. Check and replace the filter.
The lamp cannot light up. (The projector is preparing 

for stand-by or the projection lamp is being cooled 

down. The projector cannot be turned on until 

cooling is completed.)
The lamp cannot light up. (The lamp has been 

cooled down enough and the projector is in stand-

by mode and ready to be turned on with the ON/

STAND-BY button.)

When either of the 2 lamps is out, the projector 

operates with 1 lamp.

The lamp has been used overtime. Replace the 

lamp immediately.

✽

✽

✽

✽

✽

✽

✽

  When the filter detects clogging, reaches a time set in the timer setting or runs out of the filter scroll, the WARNING 

FILTER indicator lights orange. When this indicator lights orange, replace the filter or the filter cartridge with a new 
one promptly. Reset the Filter counter and Scroll counter after replacing the filter cartridge (p.66). 

✽

✽

✽

✽

✽

✽

✽

✽

✽

✽

✽

✽

✽

✽

  When the LAMP 1 REPLACE indicator and the LAMP 2 REPLACE indicator light orange, replace the projection lamps 

with new ones promptly. See page 68.