Scitec 2860c Manual Do Utilizador
5) DOWN : Key to display the next Caller ID entry
6) DEL : Key to delete the Caller ID entries (one or all)
7) DIAL: Key to dial the selected Caller ID entry. Also used during
6) DEL : Key to delete the Caller ID entries (one or all)
7) DIAL: Key to dial the selected Caller ID entry. Also used during
telephone setup for options programming
8) STORE: Key to store numbers into speed dial memory keys M1
and M2
9) FLASH: Key to generate a flash at the programmed flash time
(600ms , 300ms or 100ms)
10) R/P: Redial/Pause key, used to redial last number dialed, or a 2.2
seconds pause
11) SPKR: Key to set the hands-free speakerphone function on or off
12) RING: Switch (on rear) to set ringer volume high or low
13) VOLUME: Switch (on rear) to adjust speakerphone volume high
12) RING: Switch (on rear) to set ringer volume high or low
13) VOLUME: Switch (on rear) to adjust speakerphone volume high
or low.
Operating instructions
Telephone Options Setup:
The user options should be set on the 2860C prior to placing it into
service. The following options are user-programmable on the 2860C:
• Language (English, Spanish, or French)
• Local area code (3 digits)
• Real time clock time and date (hour, minute, month, and day)
• Flash time (600ms, 300ms, or 100ms)
• LCD contrast level (1-8)
Telephone Options Setup:
The user options should be set on the 2860C prior to placing it into
service. The following options are user-programmable on the 2860C:
• Language (English, Spanish, or French)
• Local area code (3 digits)
• Real time clock time and date (hour, minute, month, and day)
• Flash time (600ms, 300ms, or 100ms)
• LCD contrast level (1-8)
To set user options on the 2860C:
1) Verify that the telephone is “on-hook” and that it is in standby
1) Verify that the telephone is “on-hook” and that it is in standby
mode (TOTAL and NEW call counts are displayed on the LCD).
2) Press and hold the DIAL key for at least 3 seconds, until
“OPTIONS MENU ▼▲” appears on the LCD display. Release the
DIAL key.
DIAL key.
3) Within three seconds, press the UP or DOWN key to select the
option to be set: “SET LANGUAGE”, “LOCAL AREA CODE”,
“SET TIME/DATE”, “SET FLASH TIME”, or “(LCD)
CONTRAST”, then press the DIAL key to confirm.
“SET TIME/DATE”, “SET FLASH TIME”, or “(LCD)
CONTRAST”, then press the DIAL key to confirm.
4) Press the UP or DOWN key to set the option to the desired value,
then press the DIAL key to confirm.
5) After setting all options as desired, select “EXIT OPTION” or
“OPTIONS MENU ▼▲”, then press the DIAL key to return to
standby mode.
standby mode.
Placing a call:
1) Lift the handset or press SPKR button and listen for a dial tone.
2) Dial the desired telephone number using the keypad. The dialed
digits will be displayed on the LCD as the number is dialed.
3) The call length timer will begin counting after 15 seconds.
4) To end a call, place the handset on the telephone base unit, or if
4) To end a call, place the handset on the telephone base unit, or if
using the hands-free speakerphone, press the SPKR key. The call
time length will remain on the display for 5 seconds, and then the
display will revert to the standby display mode.
time length will remain on the display for 5 seconds, and then the
display will revert to the standby display mode.