Scitec 2860c Manual Do Utilizador
Last number redial:
1) Lift the handset or press SPKR button and listen for a dial tone.
2) Press the R/P button; the last number dialed will appear on the
1) Lift the handset or press SPKR button and listen for a dial tone.
2) Press the R/P button; the last number dialed will appear on the
LCD display and is dialed automatically.
Handset Volume Adjustment:
Press the VOL key repeatedly to adjust the handset volume to the
desired level. One of three levels (low, medium, and high) may be
selected.
Speakerphone Volume Adjustment:
Set the VOLUME switch (located on the rear of the 2860C) to the
desired position (HI or LOW).
Speed Dial Memory Key Programming and Dialing -
Programming the One-Touch Speed Dial Keys (M1 and M2):
1) Press the STORE key; “STORE NUMBER” will appear on the
display.
2) Dial the telephone number to be stored, up to 22 digits. These digits
may be 0-9, Tone(*), #, and pause (key R/P), each of which is
counted as one digit.
counted as one digit.
3) Press the desired one-touch speed dial key (M1 to M2) to store the
dialed number in memory.
4) To change a stored number, repeat the instructions above and the
new telephone number will replace the previously stored number.
Making calls with the One-Touch Speed Dial Keys (M1 and M2):
1) Pick up the handset or press the SPKR key, and listen for dial tone.
2) Press the desired one-touch speed dial key M1 or M2; the stored
number will be dialed automatically.
Viewing Caller ID entries:
The 2860C telephone stores Caller ID data for the last 80 calls received
including “UNAVAILABLE” and “BLOCKED” calls.
1) Press the DOWN key to view calls starting with the newest call.
2) Press the UP button to view calls starting with the oldest call.
3) Repeatedly press the UP or DOWN button to scroll through the
call list as desired.
4) After all new calls are viewed, the “New Call” LED indicator will
stop flashing.
Deleting entries from the Caller ID list –
Deleting a single Caller ID entry:
1) Press the UP or DOWN key as needed to select the Caller ID entry
Deleting a single Caller ID entry:
1) Press the UP or DOWN key as needed to select the Caller ID entry
to be deleted.
2) Press the DEL key once, and “DELETE CALL ? ” will be
displayed on the LCD.
3) To cancel without deleting the selected entry, press either the UP or
DOWN key.
4) To continue and delete the selected caller ID entry, press the DEL
key.