Scitec 2860c Manual Do Utilizador
Deleting all Caller ID entries:
1) Press the UP or DOWN key to display any caller ID entry.
2) Press and hold the DEL button down for at least 5 seconds, until the
1) Press the UP or DOWN key to display any caller ID entry.
2) Press and hold the DEL button down for at least 5 seconds, until the
LCD display changes to “DEL ALL CALLS ?”
3) To cancel without deleting any calls, press either the UP or the
DOWN key.
4) To continue deleting all entries, press the DEL key. All entries will
be deleted and “NO CALLS” will be displayed on the LCD.
Dialing using a Caller ID entry:
On-hook:
1) Use the UP and DOWN keys to select the caller ID entry to be
dialed.
2) Press the DIAL key. The LCD will display “PICK UP OR ADJ ”
for 10 digit numbers, or “PICK UP PHONE ” for 7 digit or 11 digit
numbers.
numbers.
3) To adjust the phone number, press the DIAL key. For instance, a
7-digit local number sometimes cannot be dialed because it
requires a 10-digit or 11-digit format. Press the DIAL key
repeatedly to scroll through the 7, 10, and 11-digit numbers.
requires a 10-digit or 11-digit format. Press the DIAL key
repeatedly to scroll through the 7, 10, and 11-digit numbers.
4) To dial the displayed number, pick up the handset or press the
SPKR key. The LCD will display “DIALING ... ” and the number
will be dialed automatically.
will be dialed automatically.
Off-hook:
With Local Area Code programmed:
1) Select the telephone number variation to be dialed using the UP
With Local Area Code programmed:
1) Select the telephone number variation to be dialed using the UP
and DOWN keys.
2)
If the displayed number is 10 digits, press the DIAL key and the
LCD will display “DIALING ... + 1 ”. The selected 10 digit number
will be prefixed with a “1” and dialed automatically.
LCD will display “DIALING ... + 1 ”. The selected 10 digit number
will be prefixed with a “1” and dialed automatically.
3) If a prefixed “1” is not desired, press and hold the DIAL key for 2
seconds. The LCD will display “DIALING...” and the 10 digit
number will be dialed automatically.
number will be dialed automatically.
4) If the displayed number is 7 digits, no adjustment can be made.
With Local Area Code not programmed (default setting “- - -”):
1) Use the UP and DOWN keys to select the number to be dialed.
2) If the displayed number is 10 digits, press the DIAL button. The
With Local Area Code not programmed (default setting “- - -”):
1) Use the UP and DOWN keys to select the number to be dialed.
2) If the displayed number is 10 digits, press the DIAL button. The
LCD will display “DIALING...” and the 10-digit number will be
dialed automatically.
dialed automatically.
3) To prefix the 10 digit number with a “1”, press and hold the DIAL
key for 2 seconds. The LCD will display “DIALING ... + 1” and a
“1” followed by the 10 digit number will be dialed automatically.
“1” followed by the 10 digit number will be dialed automatically.
4) If the displayed number is 7 digits, no adjustment can be made.
Low Battery Detection:
The “low battery” symbol will appear on the LCD display when the
phone detects that the batteries need to be replaced. To replace the
Low Battery Detection:
The “low battery” symbol will appear on the LCD display when the
phone detects that the batteries need to be replaced. To replace the