Nortel 4134 Instrução De Instalação
48
Installing Secure Router 4134 hardware components
Installing a Medium Module
Procedure steps
Step
Action
1
Using a Phillips screwdriver #2, remove the slot cover plate from the
slot in which you are installing the module.
slot in which you are installing the module.
2
Align the module with the slot and the slot module guides.
3
Slide the module into the chassis until its connector panel touches
the chassis back panel.
the chassis back panel.
4
Push gently, but firmly, to seat the connector on the interface module
in the chassis back panel.
in the chassis back panel.
5
Ensure the lever on the module is flush with the front panel of the
Secure Router 4134.
Secure Router 4134.
6
Using a Phillips screwdriver, tighten the two captive screws to secure
the module to the chassis.
the module to the chassis.
—End—
Installing a Large Module
Install the Large Module in slots 6–7 only.
Procedure steps
Step
Action
1
Using a Phillips screwdriver #2, remove the slot cover plates from
slots 6 and 7.
slots 6 and 7.
2
Loosen the captive screw at the top of the center slot module guide.
3
Remove the center slot module guide. The following figure shows
the removal of the center slot guide.
the removal of the center slot guide.
Nortel Secure Router 4134
Installation — Hardware Components
NN47263-301
01.02
Standard
10.0
7 August 2007
Copyright © 2007, Nortel Networks
.