Revel f50 Guia Do Utilizador

SYSTEM OPTIMIZATION

1. After connecting the F50a loudspeakers, initially set the

TWEETER LEVEL CONTROL on both rear panels to the
“0” position, as shown in Figure 12 (below). 

2. Turn on the system power and play a favorite piece of music.

Slowly increase the volume to a comfortable level and listen
from your main listening position. If desired, experiment with
placement (see page 8) to achieve the best overall tonal balance,
image specificity, and spaciousness.

3. You may also wish to further adjust each TWEETER LEVEL

CONTROL. Varying the control will change the high frequency
balance and timbre. Differences in room acoustics often demand
different level control settings.  

Serial Number
 xxxx

Serial Number
 xxxx

Set Tweeter

Level Control

To “0”