3com S7906E Guia De Referência
1-6
z
Do not use the destination mirroring port for any purpose other than port mirroring.
Examples
# Configure Ethernet 2/0/1 as the destination port of port mirroring group 1 (a remote destination port
mirroring group).
<Sysname> system-view
[Sysname] mirroring-group 1 remote-destination
[Sysname] mirroring-group 1 monitor-port Ethernet 2/0/1
mirroring-group remote-probe vlan
Syntax
mirroring-group group-id remote-probe vlan rprobe-vlan-id
undo mirroring-group group-id remote-probe vlan rprobe-vlan-id
View
System view
Default Level
2: System level
Parameters
group-id: Port mirroring group number, in the range of 1 to 4.
rprobe-vlan-id: ID of the VLAN to be configured as the remote mirroring VLAN. Note that the VLAN must
be an existing static VLAN.
Description
Use the mirroring-group remote-probe vlan command to specify a VLAN as the mirroring VLAN for a
remote source port mirroring group or a remote destination port mirroring group.
Use the undo mirroring-group remote-probe vlan command to remove the remote mirroring VLAN
from a remote source mirroring group or a remote destination mirroring group.
Note that:
z
Only remote source port mirroring groups or remote destination port mirroring groups can have
remote mirroring VLANs. A port mirroring group can have only one remote mirroring VLAN.
z
To remove a VLAN operating as a remote port mirroring VLAN, you need to restore it to a normal
VLAN first. A remote port mirroring group gets invalid if the corresponding remote port mirroring
VLAN is removed.
z
You are recommended to use a remote mirroring VLAN for remote mirroring only.
Examples
# Specify VLAN 2 as the remote mirroring VLAN of port mirroring group 1 (assuming that VLAN 2
already exists).
<Sysname> system-view
[Sysname] mirroring-group 1 remote-source
[Sysname] mirroring-group 1 remote-probe vlan 2