ONKYO DX-C390 Manual De Instruções

 

12

 

• Read the manuals supplied with your other audio 

equipment.

• Don’t connect the power cord until you’ve completed 

all audio connections.

The DX-C390 has analog and digital (coaxial and opti-
cal) audio outputs. The digital outputs offer the best 
audio quality, so if your digital recorder or amp has a 
digital input you should use it.

 

If your hi-fi amp or AV receiver doesn’t have a digital 
input, use the supplied RCA/phono audio connecting 
cable to connect the DX-C390’s ANALOG AUDIO 
OUTPUTs to your amp’s analog CD inputs.

 

• RCA/phono audio connecting cables are usually color 

coded: red and white. Use red plugs to connect right-
channel inputs and outputs, and use white plugs to 
connect left-channel inputs and outputs.

• Push each plug in all the way to 

make a good connection (loose 
connections can cause noise or 
malfunctions).

• To prevent interference, keep 

audio cables away from power 
cords and speaker cables.

 

If your CD-R, MiniDisc, or DAT recorder has a digital 
input, use a commercially available coaxial or optical 
fiber digital audio cable to connect the DX-C390’s 
COAXIAL or OPTICAL DIGITAL AUDIO OUTPUT 
to your recorder.
You can also use the digital outputs to connect to an amp 
that has a digital input, for the best audio quality.

 

• With MP3 tracks, the digital outputs only work if the 

sampling rate is 32 kHz, 44.1 kHz, or 48 kHz.

• The OPTICAL DIGITAL AUDIO 

OUTPUT has a dust cap for keep-
ing out dust and dirt when it’s not 
in use. Remove the cap before 
connecting an optical fiber cable. 
Push the plug in all the way to 
make a good connection. Keep the 
dust cap in a safe place for future use.

Right!

Wrong!

RCA/phono 
audio con-
necting cable

Optical fiber cable

(not supplied)

CD-R, MiniDisc, DAT recorder 

or digital amp

Hi-fi amp, AV receiver

R

L

Coaxial cable 
(not supplied)

Coaxial cable

(not supplied)

DX-C390_En.book Page 12 Wednesday, August 27, 2003 5:49 PM